2007.October - K2007 / Dusseldorf

K 2007 International Messe in Dusseldorf from 24-31.10.2007 stand No. 13-B72

For full details, please contact us directly at sales@topfinemac.com , or rls@topfinemac.com

2006.September - Tiprex 2006 / Bangkok, Thailand

'TIPREX' is an exhibition targeting the Indo-China market and to meet this market requirement 'TOPFINE' exhibited a 'A110/EA' machine incorporating a 'A85/M10C' control system and a low noise hydraulic system based around an energy efficient variable displacement pump from 'Yuken' of Japan.

At the exhibition the 'A110/EA' produced the cover for a container used for a micro-wave cooking with a wall thickness of only 0.45 millimetres within a cycle time of 5 seconds. This product was moulded perfectly on a standard machine and without the need for accumulator assisted injection.

Considerable interest was shown in the 'A/EA' series of machines, 100 - 3500 kN clamp, resulting in the exhibition machine being sold to a well known Thai injection moulding company in the first day of the exhibition.

For full details of our 'A/EA' and other machines please contact us directly at sales@topfinemac.com , or rls@topfinemac.com

2006.August - Tiprex 2006 / Bangkok, Thailand

Venue:
Bangkok International Trade & Exhibition Centre (BITEC)
8 Bangna - Trad Bangna, Bangkok 10260, Thailand

Show Time:
14-16 Sept. 2006 (10:30~19:00) open to Trade visitors only
17 Sept 2006 (10:30~18:00) open to Tade and public visitors

Machine:
"Topfine" A110 injection mouding machine

Information:
www.tiprex.com

2006.April - SCANPLAST / Gothenburg, Sweden

In conjunction with our Scandinavian Agent, AWI Maskin AB, a 'A110' machine was exhibited as shown below. For enquiries within Scandinavia please contact AWI directly by telephone at (46) 40 41 03 00, or by e-mail at lars-olle.nilsson@awim.se

2006.February - HONG KONG AWARD TO INDUSTRY

Topfine Machinery is proud to announce that its 'A SERIES' of Injection Moulding Machines is the winner of the 'Hong Kong Awards for Industry - Machinery and Equipment Design.

2005.November - EQUIPLAST 2005 / Barcelona, Spain

At EQUIPLAST four different TOPFINE machines were to be found on two different stands. On the stand of our Spanish Agent, Fultech SL a 'A10' and a 'A50' were on display and on the stand of leading Portuguese mould maker Plasdan Lda a 'A110' and 'A230' were on display with the 'A110' being equipped with a second injection unit and rotary table for '2K' moulding and the 'A230' being equipped with a unique mould from Plasdan which enables 'INJECTION-STRETCH-BLOW MOULDING' to be performed on a standard Injection Moulding Machine. For enquiries from within Spain please contact Fultech directly by telephone at (34) 93 225 02 60, or by e-mail at comercial.fultech@gmail.com

2005.June - PLASTICOS 2005 / Buenos Aires, Argentina

PLATICOS 2005 saw the introduction of TOPFINE to the South American market through our newly appointed Argentinean Agent, Bakwel. For direct enquiries from within Argentina contact Bakwel by telephone at (54911) 5500 7409, or e-mail at bakwel@fibertel.ar

2005.May - PLASTEX 2005 / Cairo

In line with local market requirements a '185TN' machine was exhibited on the stand of our Egyptian Agent, EPSI sa. For enquiries from within Egypt pleases contact EPSI directly by telephone at (202) 26 86 083, or by e-mail at epsi_me@hol.gr

2005.April - PDM 2005 / Telford, United Kingdom

PDM 2005 provided the launch venue of 'TOPFINE' machines into the UK through our newly appointed Sole Agent, "Plastic Machinery Sales UK Ltd". For enquiries from within the UK please contact Plastic Machinery Sales directly at (44) 0 12 99 25 33 88.

2005.March - PLASTICA 2005 / Athens

The exhibit of a '2000.220.CE' machine with NC4000 control was located on the stand of our Greek Agent EPSI sa. For enquiries from within Greece please contact EPSI sa directly by telephone at (30) 210 43 10 67 0, or by e-mail at info@epsi.gr

2004.December - PLAST EURASIA 2005 / Istanbul

Following shortly after the Dusseldorf exhibition it was necessary to rush the 'A110' exhibited at "K2004" directly to "PLAST EURASIA" where considerable customer interest was shown.

2004.October - K2004 / Dusseldorf

K2004 was the launch platform for our 'A Series' machines with a 'A110' machine being exhibited. A significant number of enquiries were received from both would be customers and Agents from all corners of the World.

2004.May - HK Office & Factory relocation

Our office has been relocated at "2 Wang Lee Street, Yuen Long Industrial Estate, Yuen Long, N.T., Hong Kong"